|
|
Naismith Engineering has expanded its range of complete HTD drives. Arriving
this week
is the latest addition to our HTD range, 3M HTD Belts. In the past,
3M HTD belts were difficult to get, not many companies carried a full stock range, but now all sizes are available off the shelf. This
means that Naismith Engineering now stock 3M, 5M, 8M & 14M HTD Belts as well as the pulleys to suit these belts, 3M are available in
pilot bore only and all other sizes are available in both pilot & taper bore.
So if it is HTD pulleys or belts that you are looking for then try Naismith
Engineering. Chances are that the pulleys and belts you want are sitting on the shelf.
|
