 |
|
|
SIT S.p.A. Trasco Couplings |
||||||
|
Once again Naismith Engineering have expanded its range of Sit Trasco Curved Jaw couplings. We now carry the two different styles of standard hub - ‘A’ and ‘B’ styles. The difference is in the maximum bore that will fit in to each hub. This can be worked out from the part number. For example, GRMP-42/55. This hub will take up to 42mm bore and key with an ‘A’ style hub and 55mm bore and key with a ‘B’ style hub.
We are also stocking the long series hubs in both style ‘A’ and ‘B’. These hubs are ideal for use on long shafts when you want the full length of the shaft to be covered by the hub, or to take up a shaft spacing problem. The long hubs are heavier, and provide a higher inertia. The TRASCO Coupling range is one of the most versatile couplings in the Naismith Engineering range. It has standard hub with many configurations available in Cast Iron and Aluminium. The standard hubs are also available to suit taper lock bushes and bolt on flanges. The elements are available in 3 different shore hardness 80 shore (Blue), 92 Shore (White or Yellow) and 98 Shore ( Red).
The same basic coupling design is also available in a Zero Backlash range, with specially machined Zero Backlash hubs made of Aluminium in Solid and Clamp Style hubs. For further information email
marketing@naismith.com.au
|
||||||
| search | ||||
|